Interior and Carpet Restoration

I pulled the interior and carpet on the 1965 convertible Mustang with the intention of replacing pretty much everything.  I wasn’t sure what condition the floor pans would be in, but I’ve patched and replaced pans in other mustangs, so the prospect doesn’t frighten me too much.

Here’s what the Mustang looked like before I got started:
IMG_0496

1965 factory pink mustang

(I can only pray that sticky stuff on the steering wheel is oil…)

1965 factory pink mustang

The seats and door panel inserts looked pretty good, so we decided to save them, and we pulled all the interior components out:Pink Mustang Interior

(One of my neighbors called the color “titty pink” back in the 60′s.  Sounds about right.)

Pink Mustang Interior

Pink Mustang Interior

Pink Mustang Interior

(The secret to restoring vinyl: If you overexpose your photos, white seats always look great!)

1965 Mustang Convertible Carpet Replacement

1965 Mustang Convertible Carpet Replacement

1965 Mustang Convertible Carpet Replacement

Next I sanded down any surface rust in the pan and sprayed it expoxy primer.  I also sanded down the door interiors and dash, taped them off, sprayed with epoxy primer, and the painted with 1965 Ford interior white paint:
1965 Mustang Door Re-Paint

1965 Mustang Door Re-Paint

1965 Mustang Door Re-Paint

(Stuffing your mustang in a big plastic bag is NOT an appropriate disposal method)

1965 Mustang Door Re-Paint

I also removed the center console and re-sprayed that as well.  The chrome on the console is less than perfect, but it is still very presentable, and at the cost of replacing the chrome, I opted to instead keep it.  I then went ahead and replaced the carpeting with a carpet kit from CJ’s Pony Parts:

1965 Mustang Convertible Carpet Replacement

(The instructions said “PRE-MOLDED”.  Technically true, but hardly “plug-and-play”)

1965 Mustang Interior Restoration

Once the carpet was done, I reassembled the interior and replaced the padded dash which had been warped over the years due to sun and age. Along with the new carpet and paint, I also replaced the steering wheel and horn ring.  Here’s what the new interior looks like:

1965 Mustang White Interior

(Strategic angles prevent you from seeing the missing kick panel)

1965 Mustang White Interior

(Now, if only I had fixed the rear window cranks while the interior was out!)

1965 Mustang White Interior

The new interior looks and feels great!  I’m thrilled to have it done, and the only thing I’m thinking of doing to the interior now is either refinishing or replacing the gauge cluster, but other than that I have no complaints.  Having done the interior on a ’65 coupe in the past, I have to say that the convertible was much easier considering that I could put the top down as I worked on it!

Motorcraft 2100 Carburetor is finished!

Motorcraft 2100 Carburetor

I’ve got the Carburetor finished, and it’s running great!  As it turns out, the inlet valves were almost completely gummed up, which would probably be why the car was stalling out so badly, and the gaskets were pretty much falling apart. (10 years of storage will do that!)

I got an electric choke to replace the original, but I haven’t actually installed it because the vacumn pump seems to be working perfectly after the rebuild (My original suspicion was that the original choke was shot).  I’m hanging onto the electric choke as a backup, and I’ve finished replacing the convertible top and interior, so I’ll post that good stuff in a bit!
1965 mustang carburetor

1965 mustang carburetor

Motorcraft 2100 Carburetor

Motorcraft 2100 Carburetor

Motorcraft 2100 Carburetor